• +880 18 47 419000-02
  • info@xolaren.com
  • SAT-THU 09:00 AM - 07:30 PM, FRIDAY - CLOSED

ELESOL® 

Elesol

ELESOL® has been introduced by  XOLAREN  in Bangladesh.

It helps any electrical facility to save Electrical energy by  8-15%  (avg.). It also improves the longevity of machines/equipment.

This unique energy saving plate has been researched and manufactured in Japan through a joint Research of  ELESOL INC.  and the  Tokyo Institute of Technology, Japan .

ELESOL® is an electromagnetic attenuating plate that is capable of attenuating (or reducing) the amount of harmonics and electromagnetic fluctuations in electrical current that are originated within the electrical system, improving its (electrical system) power quality. The existence of harmonics in electrical systems leads to distortion and deviation of current and voltage from sinusoidal waveforms that incur additional energy expenses. ELESOL® saves that additional energy which reflects in the form of monetary saving (indirectly).

WHAT IS ELESOL®? 

We all understand that poor quality resources do not bring excellence for production or company. Similarly, if the quality of electrical power is poor in a factory / facility, the energy will be wasted. It's an indirect wastage of cash! Harmonics (Electrical noise- Radiative, Conductive and Electromagnetic) is an inseparable component of any electrical system. But harmonics (or electrical noise) in any factory / facility creates power losses.

ELESOL®  is an electromagnetic plate capable of attenuating (or reducing) the amount of harmonics and electromagnetic fluctuations in electrical current that are originated within the electrical system, improving its (electrical system) power quality. The existence of harmonics in electrical systems leads to distortion and deviation of current and voltage from sinusoidal waveforms that incur additional energy expenses. ELESOL®  saves that additional energy which reflects in the form of monetary saving (indirectly). ELESOL® is a product developed and manufactured in Japan with comprehensive cooperation with the Tokyo Institute of Technology's ELESOL laboratory.

Over the past 5-6 years, ELESOL®  has already established company partners in over 28 nations around the globe. More than 250,000 plates around the world have already been installed so far.

WHERE TO INSTALL & HOW? 

ELESOL® plates are used in the entire electrical system. When we implement a project we always preferable to use it near the load; but not with all the load in a facility. In three phase we need to install at least three plates near the load (if the load size is bigger, we do install multiple plates per phase). Usually, in an industrial or commercial facility, we do not use ELESOL plates on a load less than 10kW (in so many cases we do even discard 20kW load as well). ELESOL® is the simple to install on an electrical system.

The video will show you how ELESOL plates are installed on/in the electrical system.

https://www.youtube.com/watch?v=gCek7FsS00w

The material of “ELESOL® Plates” enables the reduction of electricity consumption in facilities by specifically blocking electrical interference at extremely high frequencies (also referred to as “noise”), which are often overlooked by regular harmonic detectors.

It blocks EMI (electromagnetic interferrences) from the entire electrical system. The EMI are categorized into different frequency bands

  • Radiated Emission Noise (from 30MHz~1GHz)
  • Conducted Emission Noise (from 150kHz~30MHz)
  • Electromagnetic waves (lower than 150kHz)
  • HOW ELESOL® DOES WORK? 

    EFFICACY        

    By using ELESOL® Plates with end user devices/machines, manufacturers can greatly improve their products’ ability to reduce high frequency EMI/RFI electronic noise. Power is a measure of how quickly energy is transferred. Efficiency is a measure of how much useful energy or power is transferred. By considering where energy is ‘wasted’ we can improve efficiency.

    During energy transformations, energy can neither be created nor destroyed. However, some energy can be transformed into unwanted forms of energy, meaning that there is less useful energy after the change than there was before. In most situations, some energy is changed into heat or noise and lost to the surroundings.

    HOW THE ENERGY LOSS CAN HAPPEN?

    Electrical energy can be lost during the generation process, during distribution and as we use it in our facilities (Factories, Homes, Offices…etc.).

    Generators, Chillers, Pumps…etc. have moving parts which, even when lubricated, rub together to produce friction and heat. Also, those machines are large and noisy, so they produce a noise energy as well.

    As electricity as distributed through the National Grid, energy is lost from the transmission lines and when it is transferred from the power stations to the lines and the lines to our facilities.

    Finally, we lose energy in our facilities. The machines and appliances we use are not perfect converters, inverters, speed drives…etc. of electricity and therefore we lose some of the electrical energy. For example, the next time you use your laptop or computer, touch the underneath or side and you'll find it's very warm. This is because as it processes data, the computer chip gives out heat energy, if the computer with it little consumption could cause these losses, what a huge induction load machine can do???

    Therefore, some of the electrical power going into your machine is lost as heat and noise to the surroundings.